- The whole is composed of a 5mm steel plate shell and an inner lining. There are explosion vents and pressure relief valves on the top, which can efectively isolate the impact of battery explosion on the outside world.
- The interior of the box is lined with freproof and anti-corrosion materials, and the joints of the door are pasted with high-quality fre-proof expansion materials, which have excellent fre-proof and anti-corrosion properties.
- Gas spring support rods are equipped on both sides of the box to facilitate the opening and closing of the box cover.
- The box cover is equipped with a temperature monitoring device, which can efectively monitor the internal temperature of the box, and the temperature display range: 0~800°C.
- There is a 2″ water inlet component on the top of the box cover, which can be connected to the national standard fre hydrant connector for water injection and cooling of the internal battery. There is a 2″ water outlet component at the bottom of the box. When the water level reaches a certain position, you can choose to open the water outlet The component’s ball valve is drained.
- The front side of the box is equipped with a liquid level gauge, which can efectively observe the liquid level in the box. The glass tube is made of high borosilicate material, which has a certain freproof performance.
- The inside of the box is equipped with a battery holder, which can be adapted to place batteries of diferent sizes and facilitate the removal of the spreader.
- An explosion vent and a pressure relief safety valve are reserved on the top of the box, which can efectively prevent internal overpressure.
- There are four load-bearing wheels at the bottom of the box, each with a load-bearing capacity of 1000KG, to ensure high load-bearing transfer of the box.
- A forklift position is reserved at the bottom of the box to facilitate forklift transfer.
