Thương hiệu: Skylotec

The CLAW LINE TOP ANCHOR POINT for the "ladder attachment" system variant, in which the arrester system can be attached directly to the aluminium ladder used. The stainless steel anchor point ensures that the force applied in an emergency is fully borne by the system thanks to its high force absorption capacity with the aid of a spar and rung reinforcement over 3 rungs.

The CLAW LINE TOP POST STEEL LADDER is made of stainless steel and is used for climbing over (steel) ladders. At the end there is an anchor point according to DIN EN 795 and is thus also suitable for attaching the PSAgA. The element is installed by simply hooking it into the middle rung, which is equipped with an alligator clip and the angle for easier installation.

The CLAW LINE TOP POST ALUMINIUM LADDER is made of stainless steel (CL-015) or galvanised steel (CL-016) and is used for climbing over aluminium ladders. At the end there is an anchorage point according to DIN EN 795 and is therefore also suitable for attaching PPE.

The CLAW LINE STRUCTURE ANCHOR POINT can be used on an existing structure as an upper and/or lower anchor point for the CLAW LINE fall arrest system. It can be used wherever there is a suitable structure, e.g. concrete under and/or above the ladder, and is used to hold the tensioner (bottom) or the stainless steel cable (top).

The SKYLOTEC CLAW Vertical Fall Arrest Sleeve is designed to fit a wide variety of solid core wire ropes (cables) and travel smoothly along the vertical system while providing fall arrest when needed.

Removable fall arrest device for “CLAW LINE lifelines made of stainless steel and galvanized steel. Equipped with double action opening system and patented antioverturning function.

The battery-powered RCX rope winch is a motorised system to ensure the transport of persons or loads to hard-to-reach areas where occasional or repetitive work is carried out. The ActSafe RCX rope winch has been specially developed for effortless and efficient rescue operations.

MILAN 2.0 POWER có thể chỉ được sử dụng với những thiết bị được cung cấp bởi Skylotec. Tời quay điện sử dụng pin sạc được phát triển đặc biệt sử dụng với MILAN 2.0 Power, qua đó có thể dễ dàng và nhanh chóng nâng người gặp nạn hoặc chính bản thân người sử dụng di chuyển trong một khoảng cách xa.

The SPARROW RESCUE KIT is a rescue kit designed for working at height. It can withstand a working load of up to 150 kg. The kit can be used for direct rescue (work on rope) and indirect rescue (work on a roof etc.). The rope of the rescue kit is available in different lengths: 20, 30, 40, 50 and 100 metres. It can also be used in combination with the LIFTY and LIFTY X6 hoists. In addition, the kit is supplied in a durable PVC bag. 

Ròng rọc này được thiết kế di động, giúp dễ dàng lắp đặt với các kết nối khác nhau.

Pulley with mobile side plates that allow the insertion of any connector

Ròng rọc dây thừng, làm bằng nhôm, có vòng bi, dùng cho dây thừng Ø ≤ 13 mm, kèm thêm lỗ ren cho hệ thống kéo.