SK12 Kobra TRI/E Rope Grab Temporarily Vertical Lifeline

Our SKN BFD SK11 is a guided-type fall arrester with a compact energy absorber that makes it suitable for universal application in numerous areas. It has been tested for user weights up to 140 kilograms and is used primarily for vertical ascents on 11-mm ropes. Horizontal work on building edges is also possible, as it has been edge tested in accordance with RFU CNB/P/11.075 - Rev. 2.

The universally applicable SCOUT fall arrester with integrated strap fall arrester offers a large range of motion due to the rope length (5 m, 10 m, 15 m, 20 m). It is approved for user weights up to150 kilograms and, due to its edge suitability, can be used both for vertical ascents and for horizontal work on fall edges.

After a fall, the injured person is often hanging inaccessible in free space, such as below the edge of the fall. The SKA ROPE CLAMP is used as a rescue rope clamp to create an anchor point on the lanyard of an accident victim. In this case, the rope clamp is placed on the lanyard or fall arrester rope of the casualty. This allows the casualty to be lifted until the casualty's lanyard is unloaded.

Fall arrester designed for work at height and rope access work. Compliant with EN 353-2, EN 12841-A/B standards and RFU 11.075 requirements for use on inclined and horizontal surfaces over an edge (r ≥ 0.5 mm).

The RP209 Ropegrab is fitted with a pip-pin axle, making it quick and easy to attach/detach mid-line. A thumb operated push-button is used to disengage the Pip-pin mechanism. The axle has a chamfered end, to allow for easy location of the pin.