Scout Type I Rope Grab Temporarily Vertical Lifeline

The universally applicable SCOUT fall arrester with integrated strap fall arrester offers a large range of motion due to the rope length (5 m, 10 m, 15 m, 20 m). It is approved for user weights up to150 kilograms and, due to its edge suitability, can be used both for vertical ascents and for horizontal work on fall edges. The fall arrester slides along the rope with very low friction, both during ascent and descent. Thanks to an integrated panic function, the SCOUT locks immediately in the event of a fall and enables reliable positioning of the user. The intuitive, compact fall arrester is made of stainless steel and can therefore withstand the toughest conditions. SCOUT is certified according to EN 353-2.

Part number:
L-0828
Brand:
Skylotec
Category
Fall Arrest Devices
Share:
Request a quote
  • Flexible work thanks to large range of motion
  • Universally applicable: horizontal and vertical suitability.
  • Reliable positioning thanks to panic function.
Standards: EN 353-2:2002,RFU PPE-R/11.075
Materials: Polyamide, Stainless Steel, Steel
Edge Approved: Yes
Fall Indicator: Yes
Maximum Lifetime: 10 years
Rope Diameter: 11.00 mm
Rope Length: 10 m, 15 m, 20 m

Related products

SK12 Kobra TRI/E Rope Grab Temporarily Vertical Lifeline
SK12 Kobra TRI/E Rope Grab Temporarily Vertical Lifeline
Rope for use a moveable guide for folding fall-arrest devices SKA with safeguarding.
SKN BFD SK11 Rope Grab Temporarily Vertical Lifeline
SKN BFD SK11 Rope Grab Temporarily Vertical Lifeline
Our SKN BFD SK11 is a guided-type fall arrester with a compact energy absorber that makes it suitable for universal application in numerous areas. It has been tested for user weights up to 140 kilograms and is used primarily for vertical ascents on 11-mm ropes. Horizontal work on building edges is also possible, as it has been edge tested in accordance with RFU CNB/P/11.075 - Rev. 2.
SKA Rope Clamp Temporarily Vertical Lifeline
SKA Rope Clamp Temporarily Vertical Lifeline
After a fall, the injured person is often hanging inaccessible in free space, such as below the edge of the fall. The SKA ROPE CLAMP is used as a rescue rope clamp to create an anchor point on the lanyard of an accident victim. In this case, the rope clamp is placed on the lanyard or fall arrester rope of the casualty. This allows the casualty to be lifted until the casualty's lanyard is unloaded.
Rope Grab Easy Speed Temporarily Vertical Lifeline
Rope Grab Easy Speed Temporarily Vertical Lifeline
Fall arrester designed for work at height and rope access work. Compliant with EN 353-2, EN 12841-A/B standards and RFU 11.075 requirements for use on inclined and horizontal surfaces over an edge (r ≥ 0.5 mm).
Rope Grab Temporarily Vertical Lifeline
Rope Grab Temporarily Vertical Lifeline
The RP209 Ropegrab is fitted with a pip-pin axle, making it quick and easy to attach/detach mid-line. A thumb operated push-button is used to disengage the Pip-pin mechanism. The axle has a chamfered end, to allow for easy location of the pin.