Wall Mounted Horizontal Lifeline Donutlink Frogline – Concrete End

The FrogLine horizontal lifelines low profile design combines effortless energy absorbing capabilities into every intermediate, end and corner anchor, consequently incorporating the line energy absorbers into the system. This inventive approach ensures our FrogLine lifeline systems are always installed with the maximum energy absorption possible regardless of the horizontal line length.

SafetyLink has designed a new version of concrete mounted FrogLine system which significantly reduces operational time and cost.

DonutLink concrete mounted lifeline will consist of M16 anchor rod, DonutLink washer and DonutLink adaptor for pull testing.

Mã sản phẩm:
STAT.FROGCAR002
Thương hiệu:
SafetyLink
Danh mục:
Hệ Thống Dây Cứu Sinh Phương Ngang
Share:
Yêu cầu báo giá
  • Energy absorbing horizontal lifeline.
  • Specifically for use with permanent horizontal height safety lifeline systems into concrete.
  • Over 40 % reduction in installation time.
  • Installation drilling hole diameter reduced from 28mm to 18mm.
  • Easier to drill between reo bars.
  • 25% reduction in chemical (Chemical Adhesive) needed to install the DonutLink.
  • No additional eyebolts needed for load testing.
  • Testing done in situ, no dismantling required.
  • Constructed entirely of stainless steel.
  • Equipped with an engineered energy absorbing region to minimise loads on users and structures in the event of a fall.
  • Intended for use with 8mm stainless steel cables.
  • The FrogLine has been tested and manufactured in accordance with AS/NZS 1891.2, ANSI Z359.6-2009, EN795:2012,CEN/TS 16415:2013and OSHA 1926.
Product Code Description
FROGLINE END FrogLine Base End
NUT M16 Nut: M16
WASHER M16_SPRING Washer: M16 Spring
WASHER M16_DONUT Washer: M16 DonutLink
ROD M16X130MM
 Anchor Rod: M16x130mm (45 deg cut)

Sản phẩm liên quan

Horizontal Lifeline Frogline – Steel Mounted End
Horizontal Lifeline Frogline – Steel Mounted End
A horizontal lifeline system designed to be mounted into steel construction.  End anchor designed to be mounted into steel structures as attachment points for the cable to start and terminate at.
Horizontal Lifeline Frogline – Steel Mounted Intermediate
Horizontal Lifeline Frogline – Steel Mounted Intermediate
A horizontal lifeline system designed to be mounted into steel construction.  Intermediate anchor designed to be mounted into steel structures to limit lifeline span distances.
Horizontal Lifeline Frogline – Steel Mounted Extended Intermediate
Horizontal Lifeline Frogline – Steel Mounted Extended Intermediate
A horizontal lifeline system designed to be mounted into steel construction.  Intermediate anchor designed to be mounted into steel structures to limit lifeline span distances. Longer tube to enable bending to suit small degree changes in the line.
Horizontal Lifeline Frogline – Steel Mounted Corner
Horizontal Lifeline Frogline – Steel Mounted Corner
A horizontal lifeline system designed to be mounted into steel construction.  Corner anchor designed to be mounted into steel structures.The lifeline cable runs through the corner anchor point re-directing it by up to 90 degrees.
Horizontal Lifeline Frogline – Standing Seam End
Horizontal Lifeline Frogline – Standing Seam End
SafetyLink designs and manufactures height safety roof anchors and horizontal lifeline systems which provides restraint and fall arrest safety for all residential / commercial / industrial building sites, from a series of roof anchor points to a complete network of systems for maintenance, cleaning, access and inspections where working at heights.
Horizontal Lifeline FrogLine – Standing Seam Intermediate
Horizontal Lifeline FrogLine – Standing Seam Intermediate
SafetyLink designs and manufactures height safety roof anchors and horizontal lifeline systems which provides restraint and fall arrest safety for all residential / commercial / industrial building sites, from a series of roof anchor points to a complete network of systems for maintenance, cleaning, access and inspections where working at heights.
Horizontal Lifeline FrogLine – Standing Seam Corner
Horizontal Lifeline FrogLine – Standing Seam Corner
SafetyLink designs and manufactures height safety roof anchors and horizontal lifeline systems which provides restraint and fall arrest safety for all residential / commercial / industrial building sites, from a series of roof anchor points to a complete network of systems for maintenance, cleaning, access and inspections where working at heights.
Horizontal Lifeline FrogLine – Standing Seam Corner
Horizontal Lifeline FrogLine – Standing Seam Corner
SafetyLink designs and manufactures height safety roof anchors and horizontal lifeline systems which provides restraint and fall arrest safety for all residential / commercial / industrial building sites, from a series of roof anchor points to a complete network of systems for maintenance, cleaning, access and inspections where working at heights.
Horizontal Lifeline Frogline – Corner Surface Mounted
Horizontal Lifeline Frogline – Corner Surface Mounted
An horizontal lifeline system designed to be mounted on the surface of a metal roof profile. Fitted where access to the underside of the roof structure is difficult to access.
Horizontal Lifeline Frogline – Extended Intermediate Surface Mounted
Horizontal Lifeline Frogline – Extended Intermediate Surface Mounted
An horizontal lifeline system designed to be mounted on the surface of a metal roof profile. Fitted where access to the underside of the roof structure is difficult to access.