Tango® TX2 Two-Gas Monitor
Protect workers, reduce false alarms, and spend less time managing your gas detector fleet with the Tango TX2. Unlike other two-gas monitors that use combination sensors, the Tango TX2 uses individual sensors to increase alarm accuracy so you can reduce unnecessary shutdowns and improve incident data quality.
Manufacturer: Industrial Scientific
- Reduce unexpected project shutdowns from false alarms by increasing alarm accuracy with two individual sensors
- Replaceable battery that eliminates the need for charging
- Customizable display options to see the gas readings you need most.
- Increase compliance and willingness to use the lightweight and hassle-free design
|Display:||Segment liquid crystal display (LCD)|
|Key Pad:||Two buttons|
|Cas Materials:||Case top: Polycarbonate with a protective rubber overmold.
Case bottom: Conductive polycarbonate
|Alarms:||Three strobe-emitting visual alarm LEDs (two red; one blue)
100 decibel (dB) audible alarm at a distance of 10 cm (3.94 in); Vibration alarm
|Dimensions:||99 x 51 x 35 mm (3.9 x 2.0 x 1.4 in)|
|Weight:||126.0 g (4.4 oz)|
|Temperature Range:||-40 °C to 50 °C (-40 °F to 122 °F)|
|Humidity Range:||15-95% non-condensing (continuous)|
|Sensors:||CO, CO/H2, H2S, NO2, SO2 electrochemical sensor technology|
|Battery:||3.6 V primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable; non rechargeable; always on; up to two-year run time depending on operating conditions|
|Data Logging:||3 months at 10-second intervals|
|Event Logging:||60 alarm events|
|Certifications:||DIRECTIVE OR CB AREA CLASSIFICATION STANDARDS
ATEX1: Ex ia I Ma;
Ex ia IIC T4 Ga; Equipment Group and Category: I M1 and II 1G,
EN 60079-0: 2012
EN 60079-11: 2012
EN 50303: 2000
IECEx3 Ex ia I Ma, Ex ia IIC T4 Ga
IEC 60079-0: 2011
IEC 60079-11: 2011
UL (C-US)4: Class I, Groups A, B, C, and D; Class II, Groups E, F, and G; T4;
Exia Class I, Zone 0, AEx ia IIC T4
UL 913 8th Ed.
UL 60079-0 6th Ed.
UL 60079-11 6th Ed.
CSA C22.2 No. 157
The Tango TX2 is the size of a credit card and weighs less than a smartphone. A two-year run time from a single, replaceable battery eliminates the need for charging infrastructure and simplifies gas detector management. Unlike other two-gas monitors that use combination sensors, the Tango TX2 uses individual sensors, increasing alarm accuracy so you can reduce unnecessary shutdowns and improve incident data quality.
The Tango TX1 is best for single-gas detection using DualSense® Technology for extra coverage of a single gas hazard. If you need to monitor a second gas, you should use the Tango TX2.
The Tango TX2 can support the following sensors: CO, H2S, SO2, NO2, CO H2Low.
Any two sensors from the supported sensor list can be combined in the Tango TX2.
The sensors are interchangeable. If you switch a sensor, the Tango TX2 will immediately detect the new configuration.
The TangoTX2 can display readings from sensor one, readings from sensor two, or alternate between the two readings. The default setting is for an alternating display, but users can choose to alternate the readings every three seconds or choose one sensor to be displayed.
When a sensor goes into alarm, the readings alternate regardless of the display option chosen.